Contact us – phone: +39 346 671 9000 email: info@renatobrunoartistainluce.com
€ 962,00
Aimed to satisfy the needs of those who refuse to settle for anything but the very best, Mantide, a one module suspension lamp, seizes attention for its harmonious geometric shapes, perfectly combining the functionality of a light source with the exclusivity of handmade furniture.
Completely handmade with top quality materials, aimed to last in time, Mantide, a one module suspension lamp is composed of: steel/aluminium ceiling support, an octagonal beechwood baton extracted and worked with inox stainles steel chords masterfully assembled on whose extremity the light source is accomodated.
Suspension 2 Modules Lamp - Mantide
Suspension 3 Modules Lamp - Mantide
|
III(*) |
|
DC 12V |
|
24W |
|
Direct |
|
Diffuse 360 degrees |
|
Bi-Pin led – DC 12V – 3W – Diameter mm.10 |
|
No.8 |
|
G4 |
|
A+ |
|
Up to 2.400 lumens |
The lamp must be powered by an external transformer equipped with safety markings required by the regulations and which has only the following characteristics:
Input AC 100-240V – Output DC 12V – Current Max 3A
(*)DEFINITION OF ISOLATION CLASS
A device is defniated as a Class III when the electrocution protection relies on the fact that there are no voltages higher than the very low SAFETY VOLTAGE SELV (Safety Extra-LowVoltage). In practice, this device is powered either by a battery or by a SELV transformer. The voltage produced, less than 25V AC or 60V DC, is low to the point that it is not normally dangerous in case of contact with the human body.
PACKING IN OSB 3 POPLAR
– neck 1: gross weight Kg. 15,00 – size cm. 60 X 60 X 55
€ 962,00
Ⓒ Created by NCWEBSOLUTIONS. - 2019