Contact us  – phone: +39 346 671 9000 email: info@renatobrunoartistainluce.com

Technical Characteristics
  • Insulation class:
III(*)
  • Nominal voltage (V):
DC 12V
  • Consumption:
24W
  • Light type:
Direct
  • Light emission:
Diffuse 360 degrees
  • Bulb type:
Bi-Pin led – DC 12V – 3W – Dimmable – Diameter mm.10
  • Number of bulbs:
N.8
  • Connector type:
G4
  • Transformer connector:
Jack socket DC 12V – (mm. 5.5×2.5)
  • Energy class:
A+
  • Luminous flux:
Up to 2.400 lumens
  • Item list:
ON/OFF (Sensor Touch) – Dimmable (push)
Materials
  • Wood beech
  • Stainless steel
  • Aluminium
Size and weight
  • Height: cm. 200
  • Width: cm. 68
  • Depth: cm. 68
  • Weight: Kg. 3,85

The lamp must be powered by an external transformer equipped with safety markings required by the regulations and which has only the following characteristics:

Input AC 100-240V – Output DC 12V – Current Max 3A

(*)DEFINITION OF ISOLATION CLASS

A device is defniated as a Class III when the electrocution protection relies on the fact that there are no voltages higher than the very low SAFETY VOLTAGE SELV (Safety Extra-LowVoltage). In practice, this device is powered either by a battery or by a SELV transformer. The voltage produced, less than 25V AC or 60V DC, is low to the point that it is not normally dangerous in case of contact with the human body.

PACKING IN OSB 3 POPLAR

– neck 1: gross weight Kg. 15,00 – size cm. 60 X 60 X 55 – neck 2: gross weight Kg. 0,70 – size cm. 160 X 5 X 5

Related Products