|
III(*) |
|
DC 12V |
|
27W |
|
Direct |
|
Diffuse 360 degrees |
|
Bi-Pin led – DC 12V – 3W – Dimmable – Diameter mm.10 Bi-Pin led – DC 12V – 3W – (UFO Design) – Dimmable |
|
N.8 + (1 Ufo Design) |
|
G4 |
|
Jack socket DC 12V – (mm. 5.5×2.5) |
|
A+ |
|
Up to 2.700 lumens |
|
ON/OFF (Sensor Touch) – Dimmable (push) |
The lamp must be powered by an external transformer equipped with safety markings required by the regulations and which has only the following characteristics:
Input AC 100-240V – Output DC 12V – Current Max 3A
(*)DEFINITION OF ISOLATION CLASS
A device is defniated as a Class III when the electrocution protection relies on the fact that there are no voltages higher than the very low SAFETY VOLTAGE SELV (Safety Extra-LowVoltage). In practice, this device is powered either by a battery or by a SELV transformer. The voltage produced, less than 25V AC or 60V DC, is low to the point that it is not normally dangerous in case of contact with the human body.
PACKING IN OSB 3 POPLAR
– neck 1: gross weight Kg. 15,00 – size cm. 60 X 60 X 55